Reserved Copying
1-33
1
Introduction to the Copying Functions
❑ Select the desired paper type ➞ press [OK].
If you are copying onto the back side of a previously printed sheet, press [2nd Side of
2-Sided Page].
IMPORTANT
When printing on special types of paper, such as heavy paper or transparencies, be sure to
correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set
correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become
dirty, or the paper could jam, and a service repair may be needed.
NOTE
•
[Transparency] can be selected only if [A4] is selected as the paper size.
•
For more information on the paper types, see Chapter 2, "Basic Operations," in the Reference
Guide.
● If you want to select a nonstandard paper size:
❑ Press [Free Size] ➞ [Next].
To Next Page
Loading...
