Canon MV430 - Page 75

| Six-second auto date £3 Q
The 6-second auto date appears for 6 seconds to mark the changeover of a day if
the tape was being recorded at 12:00 midnight. It also appears for 6 seconds when
you start playback and have the data code turned off. The 6-second auto date will
adjust for any time zone changes you have indicated.
MSEC. DATE--OFF
To turn the 6-second auto date on, open the menu and select
DISP.SET UR Then select 6SEC. DATE, set it to ON and close the
menu.
0 Note:
• When 6SEC.DATE is turned on but DISPLAYS (CQ 136) is turned off, the six-
second auto date will still appear for 6 seconds.
75
Using
the
Full
Range
of
Features