Canon PC920 - Fixing Heater Temperature Parameters

CHAPTER 6 FIXING SYSTEM
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 6-4
2. Controlling the Temperature of the Fixing Heater
The temperature of the fixing heater is switched according to the following two parameters:
• Temperature of the fixing heater when the Copy Start key is pressed.
• Number of copies to make in continuous copying mode
Table 6-102 shows the temperature of the fixing heater when the Copy Start key is pressed (as
detected by the thermistor TH1) and the temperatures to which the fixing heater is controlled ac-
cording to the number of copies made in continuous mode.