COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2
BASIC OPERATION
This chapter provides descriptions on basic operations, functions of each operation,
relationships between electrical and mechanical systems, and timing at which each
associated part is turned on.
Process speed 96 mm/sec
I. BASIC OPERATIONS ..................2-1
A. Functional Construction ........2-1
B. Outline of Electrical
Circuitry .................................2-2
C. Basic Sequence of
Operations.............................2-3
D. Controlling the Main Motor
(M1) .......................................2-5
E. Inputs to and Outputs from
the DC Controller ..................2-7
To Next Page
Loading...
