CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
COPYRIGHT
©
1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-10
Figure 7-304
Figure 7-305
[1]
[1]
[2]
[3] [3]
[4]
1. Removing the Top Cover
1) Remove the copyboard cover or the ADF.
2) Open the machine’s top unit.
3) Remove the two screws [1], and detach
the front upper cover [2].
Caution:
A flexible cable for the control panel is
connected to the front upper cover. Dis-
connect the cable from the DC control-
ler.
4) Free the two claws [3], and slide the left
cover [4] to detach.
To Next Page
