Canon TX-3000 - Page 199

IPv6 default gateway 2 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 default gateway 3 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 default gateway 4 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
DHCPv6 Active/Inactive
DHCPv6 stateful address XXXXXXXXXXXX
DHCPv6 stateful prefix length XXX (up to 3 digits)
IPv6 primary DNS server address XXXXXXXXXXXX
IPv6 secondary DNS server add. XXXXXXXXXXXX
IPv6 DNS dyn. update: manual Active/Inactive
IPv6 DNS dyn. update: stateless Active/Inactive
IPv6 DNS dyn. update: stateful Active/Inactive
IPv6 Use IPv4 host/domain name Active/Inactive
IPv6 DNS host name XXXXXXXXXXXX
IPv6 DNS domain name XXXXXXXXXXXX
MAC address XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
Pre-shared key XXXXXXXXXXXXXXXX (16 characters)
Authentication TLS/TTLS/PEAP/TTLS/PEAP/EAP-TTLS internal auth. method/
MSCHAPv2/PAP/Do not use
EAP-TTLS internal auth. method MSCHAPv2/PAP
Weak encryption restriction Restrict/Do not restrict
Weak certificate restriction Restrict/Do not restrict
Authentication server name XXXXXXXXXXXX
Client operation status XXXXXXXXXXXX
NTP/SNTP server address XXXXXXXXXXXX
Polling interval XXXXXXXXXXXX
Spanning tree setting XXXXXXXXXXXX
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
199