Canon TX-3000 - Connecting Smartphone;Tablet to Printer Directly Via Wireless LAN (Direct Connection)

Connecting Smartphone/Tablet to Printer Directly via Wireless LAN
(Direct Connection)
You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.
• Wireless connection (connecting devices via a wireless router)
• Direct wireless connection (connecting devices using wireless direct)
This section describes wireless direct, which allows you to print by connecting the devices to the printer
directly.
Follow the procedure below to use wireless direct.
1. Enable wireless direct.
2. Connect devices to printer.
This section also describes changing wireless direct to wireless LAN.
Changing Printer Setting to Use Wireless LAN
Important
• The administrator password is required to change settings if it is enabled for changing settings using
the operation panel.
• If a device has already been connected to the printer via wireless LAN and you want to add a device to
connect, connect it to the printer directly. You can connect up to 5 devices to the printer at the same
time.
• Check the usage restrictions and switch the printer to the wireless direct.
Restrictions
Preparing for Connection
Change settings below to prepare for wireless direct.
• Printer's LAN settings
Changing Printer Setting
• Settings of a device to connect
Connecting Smartphone/Tablet to Printer
Changing Printer Setting
1. Make sure printer is turned on.
2.
Flick HOME screen and tap LAN settings.
Menu Operations
3. Tap Change LAN.
4. Tap Activate direct connect..
615