Canon TX-3000 - Generating Server Certificate (Self-Signed Certificate)

Generating Server Certificate (Self-signed Certificate)
When you use SSL connection via IPv6 network, you need to generate an IPv6 server certificate using the
printer.
Generate the server certificate from Remote UI.
Follow the procedure below.
1. Checking Printer's IP Address
2. Generating Server Certificate
3. Checking Generated Server Certificate
Important
• If you generate an IPv6 server certificate, you cannot use SSL communication via IPv4. In addition, a
warning message may appear if you are using Remote UI.
To reset the IPv6 server certificate, select Device settings -> LAN settings -> Other settings in this
order, and select Yes for Reset SSL certificates from the operation panel.
Checking Printer's IP Address
1.
Make sure printer is turned on.
2.
Flick HOME screen and tap Device settings.
Menu Operations
The Device settings screen appears.
3.
Tap LAN settings.
4.
Tap Confirm LAN settings.
5. Tap LAN setting list or WLAN setting list according to the printer connection method.
6. Check displayed message and tap Yes.
7. Check the value on IPv6 link-local address.
Write down the value on IPv6 link-local address for your reference when you open Remote UI or
generate a server certificate.
Generating Server Certificate
1. Open web browser on your smartphone, tablet, or computer and enter the printer IP
address.
299