The server certificate starts to be generated.
When the server certificate has been generated, Generated a self-signed certificate. appears.
9.
Select Restart LAN.
LAN will be restarted.
When LAN has been restarted, Printer status on Remote UI appears.
Note
•
If you cannot access to Remote UI after you restart LAN, reload your web browser.
Checking Generated Server Certificate
1.
Select Security on Remote UI.
2.
Select SSL/TLS settings.
The SSL/TLS settings screen appears.
3.
Select Check key and certificate.
The Check key and certificate screen appears.
Make sure the issuer of the root certificate is displayed on Issuer, and the value you entered is
displayed on Common name on Subject.
301
To Next Page
Loading...
