Color mode
Lets you specify the color(s) to use when printing HP-GL/2 data.
Select this setting item from Device settings > Print settings > HP-GL/2 print settings > Print quality
settings.
• Color (perceptual) (Initial setting)
◦ If you select Line drawing for Print target:
Reproduces colors of general images naturally and features smooth gradation. In addition, selecting
this setting allows you to adjust colors easily using an application software.
◦ If you select Photo for Print target:
Reproduces colors of general photos naturally and features smooth gradation. In addition, selecting
this setting allows you to adjust colors easily using an application software.
• Color (saturation)
◦ If you select Line drawing for Print target:
Prints in easy-to-see colors suitable for line drawing.
◦ If you select Photo for Print target:
Reproduces vivid colors on data such as a poster.
• Color (correct off)
Performs printing without color matching.
• Monochrome
◦ If you select Line drawing for Print target:
Select this setting to print a line drawing using black ink.
◦ If you select Photo for Print target:
Prints color data converting to monochrome. Continuous tones are reproduced using gray halftones.
• Monochrome BMP
The colors other than white are printed in black.
221
To Next Page
Loading...
