Canon TX-3000 - Reconfiguration Method of LAN Connection;Reconfiguration Method of Wireless LAN Connection

Reconfiguration Method of LAN Connection/Reconfiguration
Method of Wireless LAN Connection
Changing LAN Connection Method
Changing Wireless LAN Connection Method
Changing LAN Connection Method
Follow either procedure below to change LAN connection method (wired or wireless).
• For Windows:
◦ Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
◦ Tap LAN settings and Change LAN in this order on the HOME screen, and then select Activate
wireless LAN or Activate wired LAN.
After that, perform settings on the Network Settings screen on IJ Network Device Setup Utility.
For details, refer to Performing/Changing Wireless LAN Settings or Performing/Changing Wired
LAN Settings.
• For macOS:
Follow the instructions on the Canon website to redo setup.
Changing Wireless LAN Connection Method
Follow either procedure below to change wireless LAN connection method (infrastructure or wireless
direct).
• For Windows:
◦ Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
◦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility.
Important
• Before you perform settings using IJ Network Device Setup Utility, turn on easy wireless
connect mode on the printer following the procedure below.
1. Make sure printer is turned on.
2. Flick HOME screen and tap LAN settings.
Menu Operations
If you specify the administrator password, enter the password.
3. Tap Wireless LAN setup.
4. Tap Easy wireless connect.
5. Check message and tap OK.
Follow instructions on your smartphone or tablet.
6. If message saying setup is completed appears, tap OK.
351