The length of printed images is inaccurate in the feeding direction
Check 1
Is Set priority for Paper feed adjustment in the touch screen menu set to
Prioritize print quality?
Set Set priority for Paper feed adjustment to Prioritize length accuracy, and then carry out Adjust feed
length.
Adjusting Feed Amount
Check 2
Is the media type specified in the printer driver the same as the media type
loaded in the printer?
Load the printer with the media type specified in the printer driver.
Loading the Upper Roll on the Printer
Loading Sheets in the Printer
Follow the steps below to match the media type in the printer driver to the media type loaded in the printer.
1.
To stop printing, press the Stop button.
2.
Reset the media type in the printer driver, and then print.
774
To Next Page
Loading...
