Canon TX-3000 - Configuration Changes Using the Web Browser

Configuration changes using the Web Browser
You can check the printer status and change the printer settings using the web browser on your
smartphone, tablet, or computer.
To check the printer status and to change the printer settings, display "Remote UI" on the web browser.
Note
• Remote UI is a software that enables you to perform operations, which are usually performed on the
printer's operation panel, using a Web browser over a network.
LAN connection with the printer is required to use Remote UI.
• You can use Remote UI on the following OS and the web browser.
• iOS device
OS: iOS 8.0 or later
Web browser: iOS standard Web browser (Mobile Safari)
• Android device
OS: Android 4.1 or later
Web browser: Android standard Web browser (Browser or Chrome)
• macOS device
OS: Mac OS X 10.9 or later
Web browser: Safari 7.0 or later
• Windows device
OS: Windows 7 SP1 or later
Web browser: Internet Explorer 11 or later, Google Chrome, Mozilla Firefox
1.
Make sure printer is turned on.
2.
Check printer's IP address.
Check the printer's IP address by following the steps below.
1.
Flick HOME screen and tap Device settings.
Menu Operations
The menu screen appears.
2.
Tap LAN settings.
3.
Tap Confirm LAN settings.
4.
Tap LAN setting list or WLAN setting list.
5.
Tap Yes.
6.
Check IPv4 address.
282