Canon TX-3000 - Standard Size Table

Standard Size Table
The table below shows the standard sizes supported by Cut to standard size.
For details on the page size supported by your printer, refer to User's Guide.
Standard Size (Portrait) Width (mm) Height (mm) Standard Size (Landscape) Width (mm) Height (mm)
ISO A0 841.0 1189.0 ISO A1 841.0 594.0
ISO A1 594.0 841.0 ISO A2 594.0 420.0
ISO A2 420.0 594.0 ISO A3 420.0 297.0
A3 Nobi 329.0 483.0 No standard – –
ISO A3 297.0 420.0 ISO A4 297.0 210.0
ISO A4 210.0 297.0 No standard – –
Standard Size (Portrait) Width (mm) Height (mm) Standard Size (Landscape) Width (mm) Height (mm)
ISO B0 1000.0 1414.0 ISO B1 1000.0 707.0
ISO B1 707.0 1000.0 ISO B2 707.0 500.0
ISO B2 500.0 707.0 ISO B3 500.0 353.0
ISO B4 250.0 353.0 No standard – –
Standard Size (Portrait) Width (mm) Height (mm) Standard Size (Landscape) Width (mm) Height (mm)
JIS B0 1030.0 1456.0 JIS B1 1030.0 728.0
JIS B1 728.0 1030.0 JIS B2 728.0 515.0
JIS B2 515.0 728.0 JIS B3 515.0 364.0
JIS B3 364.0 515.0 JIS B4 364.0 257.0
JIS B4 257.0 364.0 No standard – –
Standard Size (Portrait) Width (mm) Height (mm) Standard Size (Landscape) Width (mm) Height (mm)
No standard – – ANSI E 1117.6 863.6
ANSI E 863.6 1117.6 ANSI D 863.6 558.8
ANSI F1 711.2 1016.0 No standard – –
ANSI D 558.8 863.6 ANSI C 558.8 431.8
ANSI C 431.8 558.8 Ledger 431.8 279.4
Ledger 279.4 431.8 Letter 279.4 215.9
Letter 215.9 279.4 No standard – –
276