Enter as following in the URL field of the web browser.
http://[XXXX::XXXX:XXXX:XXXX:XXXX]
On "XXXX::XXXX:XXXX:XXXX:XXXX", enter the abbreviation value on IPv6 link-local address.
The top screen of Remote UI appears.
2. Select Log in on Remote UI.
Note
•
If you specify the administrator password, enter the password.
3.
Select Security.
4.
Select SSL/TLS settings.
5.
Select Generate key and certificate.
6.
Select Generate self-signed cert.
The Generate self-signed cert screen appears.
Specify each setting item.
• Signature algorithm
Select SHA256.
• Public key length (bits)
Select 2048 bits.
•
Specify the expiration date.
Enter the date you generated the server certificate on Valid from.
Enter the date the server certificate expires on Valid to.
• Enter the common name.
Enter the value in Common name you checked and wrote down on IPv6 link-local address
shown on the touch screen.
Note
•
When you enter the common name, add [ ] to each end of the abbreviation value of the
printer's IPv6 address .
•
Do not use a comma or make a space for the common name.
7. Select Next.
You need not enter anything on Country, State or province, Locality, Organization, or
Organizational unit.
8. Select Generate.
300
To Next Page
