Canon TX-3000 - Page 201

IPv6 stateless address 1 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 stateless prefix length 1 XXX (up to 3 digits)
IPv6 stateless address 2 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 stateless prefix length 2 XXX (up to 3 digits)
IPv6 stateless address 3 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 stateless prefix length 3 XXX (up to 3 digits)
IPv6 stateless address 4 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 stateless prefix length 4 XXX (up to 3 digits)
IPv6 default gateway 1 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 default gateway 2 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 default gateway 3 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 default gateway 4 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
DHCPv6 Active/Inactive
DHCPv6 stateful address XXXXXXXXXXXX
DHCPv6 stateful prefix length XXX (up to 3 digits)
IPv6 primary DNS server address XXXXXXXXXXXX
IPv6 secondary DNS server add. XXXXXXXXXXXX
IPv6 DNS dyn. update: manual Active/Inactive
IPv6 DNS dyn. update: stateless Active/Inactive
IPv6 DNS dyn. update: stateful Active/Inactive
IPv6 Use IPv4 host/domain name Active/Inactive
IPv6 DNS host name XXXXXXXXXXXX
IPv6 DNS domain name XXXXXXXXXXXX
MAC address XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
201