Canon TX-3000 - Page 337

To Next Page

To Previous Page

End Address 1 End address 1 XXX.XXX.XXX.XXX

Use Single On 1 Use single on 1 On/Off

Start Address 2 Start address 2 XXX.XXX.XXX.XXX

End Address 2 End address 2 XXX.XXX.XXX.XXX

Use Single On 2 Use single on 2 On/Off

Start Address 3 Start address 3 XXX.XXX.XXX.XXX

End Address 3 End address 3 XXX.XXX.XXX.XXX

Use Single On 3 Use single on 3 On/Off

Start Address 4 Start address 4 XXX.XXX.XXX.XXX

End Address 4 End address 4 XXX.XXX.XXX.XXX

Use Single On 4 Use single on 4 On/Off

LAN Setting Basic setting information -

Basic Info IPv4 setting information (Wired LAN) -

Control Filtering SNMP filtering setting information -

IP Filtering Prohibit Address IP filtering prohibit address -

Start Address 5 Start address 5 XXX.XXX.XXX.XXX

End Address 5 End address 5 XXX.XXX.XXX.XXX

Use Single On 5 Use single on 5 On/Off

Print Filtering Print filtering setting information -

Use IP Filtering Operation status of IP filtering On/Off

IP Filtering Select IP filtering method Disabled/Enabled

IP Filtering Permission Address IP filtering permission address -

Start Address 1 Start address 1 XXX.XXX.XXX.XXX