8400-M022-O1 Rev K Model 190 Indicator
SLEEP= (Sleep Mode Feature)
The Sleep Mode feature conserves battery power when the indicator remains unused for a
selected period of time. With the feature enabled, the display will be blank.
Press the TARE key to show the current status of this feature. If a number other than 0
is shown, this feature is selected and the number shown corresponds to the number of
minutes of a stable zero weight reading before the indicator enters the sleep mode.
If the setting displayed is acceptable, press the TARE key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new setting (0 to 10) and press
the TARE key to store the new setting.
NOTE: Selecting 0 disables this feature.
A oFF= (Auto Shutoff)
The Automatic Shutoff feature will automatically turn the indicator off (when it is not in use)
after a predetermined period of inactivity to prolong battery life. To turn the indicator back on
you must press the ON/OFF key.
Press the TARE key to show the current status of this feature. A number other than 0
indicates that the auto-shutoff feature is enabled and the displayed number corresponds to
the number of minutes of stable weight displayed before the indicator is turned off
automatically.
If the setting displayed is acceptable, press the TARE key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new setting (0 to 10) and press
the TARE key to store the new setting.
NOTE: Selecting 0 disables the Auto-Shutoff feature.
batt= (Battery Installed)
Press the TARE key to show the current setting. If the setting displayed is acceptable,
press the TARE key again to save it.
Otherwise, use the Fn/ key to toggle the setting and press the TARE key to save it.
NOTE: If a battery is installed, select YES for the batt= parameter. The battery
charger will be turned on automatically upon the power up of the indicator.
To Next Page
Loading...
