ECG100+ - ECG200+ - ECG100S - ECG200S
5. INTRODUCTION
The interpretations of ECG offered by the device are only significant when used in conjunction with a
physician over-read as well as consideration of all other relevant patient data.
The device is indicated for use on adult and paediatric populations.
The device is not intended to be used as a vital signs physiological monitor.
5.4. Description of the device
The device is a 12-lead diagnostic electrocardiograph which displays, acquires, prints and stores ECG tracings
for adults and children. It also calculates the main overall ECG parameters.
The device can be supplied with the optional 12-lead Glasgow resting ECG interpretation algorithm, with
specific criteria by age, sex and race. If this option is enabled, the algorithm can provide an over-reading
physician with a second opinion generating diagnostic messages in the ECG report.
For further information on the resting ECG interpretation algorithm, see the Guidance for the physician on
the application on adults and children (see accessories list)
The device can be configured with a larger memory, with two-way connectivity (LAN/WiFi) and with DICOM®
functionality in the case of models ECG100+/ECG200+.
The device can be powered by battery or the electrical mains.
The printing formats supported include: standard or Cabrera 3, 3+1, 3+3, 6 or 12 (only ECG200+/ECG200S)
channels in automatic mode and 3, 6 or 12 (only for ECG200+) channels rhythm strip printing.
The device includes:
1. Patient cable
2. Power supply
3. Paper
4. Pack of electrodes
5. Banana/clip adapter set
6. Guidance for the physician on the application on adults and children (with interpretative key)
7. User manual
To Next Page