Communicating through the Local Access port with a USB Link
Carrier® ChillerVu™
(OPN-PSM-MPCXPE) Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation and Start-up Guide 55 All rights reserved
8 Do one of the following:
○ To change a property value:
a. Type the number of the property, then press
.
b. Type the new value, then press
.
○ To take an action, type number of the action, then press
.
9 If you changed a value, type 1, then press
to restart the controller.
10 Close PuTTY.
To Next Page
Loading...
