CASE CONSTRUCTION CX160C - Level in the Hydraulic Tank; Filling the Hydraulic Tank

6-MAINTENANCE
Levelinthehydraulictank
1.Placethemachineonat,levelgroundandplacethe
attachmentinthepositionshown.Stoptheengineand
removethestarterswitchkey.
SMIL15CEXX748AA1
2.Theoilshouldbeinthemiddleoftheindicator.Add
moreoilifnecessary.See"llingthereservoir".
SMIL15CEXX723AA2
Fillingthehydraulictank
1.Releaseallpressureinthehydraulicreservoir.See
"releasingpressureinthehydraulicsystem".
2.Cleanthecoverplateandtheareaaroundtheplate.
Removethecoverplateandaddhydraulicuidtothe
reservoirasrequired.
3.Replacethecoverplatesealifrequiredandinstallthe
coverplate.
NOTICE:Makesurethatnocontaminant(water,sand
etc.)entersthereservoirduringlling.
SMIL15CEXX749AA3
6-37