CASE CONSTRUCTION CX160C - Manual Regeneration after stopping automatic regeneration

3-CONTROLSANDINSTRUMENTS
Ifregenerationissuspendedforalongtime,theengineproblemwarninglampgoesonandthediffuserneedstobe
repaired.
1.Inmanualregeneration
•
Theorangelampislit.
•
Thefollowingmessagesaredisplayedcyclically.
ManualDPDRe-gen
Donotoperate
2.Carryoutoneofthefollowingoperations.
•
Setthegatelevertotheunlockposition.
•
Operatetheengineaccelerationbutton.
•
Presstheswitch.
3.Manualregenerationstops.
•
Theorangelampblinks.
•
Thefollowingmessageisdisplayed.
PushDPDswitchtoactivate
4.Movethemachinetoasafeplacewithnocombustibleobjectsandretrymanualregeneration.
Manualregenerationafterstoppingauto-
maticregeneration
XNNFHF-001A7
IfthemachineisleftunusedforalongtimewiththeenginerunningduringDPDautomaticregeneration,automatic
regenerationmaynotstartormaynotcompletenormally.
Ifthishappens,youcanstopDPDautomaticregenerationandperformmanualregenerationtocompletetheregen-
eration.
However,notethatthemachinecannotoperateduringmanualregenerationandregenerationwilltakelonger.Ifyou
holddowntheDPDswitchfor3swhileautomaticregenerationisstopped,theorangelampashesfor10sandit
shiftstomanualregeneration.
PressingtheDPDswitchagainwhiletheorangelampisashingstartsmanualregeneration.
3-43