20021201
2-6-6
Matrix and Vector Calculations
Tip
•You can perform matrix calculations using the commands of the [Matrix-Calculation] group on the
[Action] menu. For information about using these commands, see “2-7 Using the Action Menu”.
•You can raise only a square matrix to a specific power. An error occurs when you try to raise a
non-square matrix to a specific power.
Input using the 9 keyboard Input using the ) keyboard
k Raising a Matrix to a Specific Power
Example: To raise
12
to the power of 3
34
Use the procedures described under “Matrix Addition, Subtraction, Multiplication,
and Division” on page 2-6-4 to input the calculation.
The following are the screens that would be produced by each input method.
To Next Page
Loading...
Need help?
General
