20021201
Configuring Power Properties
u ClassPad Operation
(1) On the application menu, tap Y.
• This starts up the System application.
(2) Tap X to display the Power Properties dialog box.
(3) Configure the Power Save Mode and Auto Power Off settings.
•See “Power Saving Mode” and “Auto Power Off” on page 14-6-1 for details about
these settings.
(4) After all the settings are the way you want, tap [Set] to apply them and close the Power
Properties dialog box, or tap [Cancel] to close without changing any settings.
•Tapping [Set] or [Cancel] returns you to [Memory Usage].
14-6-2
Configuring Power Properties
To Next Page
Loading...
