20021201
1 Resetting and Initializing the ClassPad
The memory of your ClassPad is divided into three parts: main memory, a storage area for
storing data, and a RAM area for executing various calculations and operations. Reset and
initialize restore normal ClassPad operation after some problem occurs.
RAM Reset
Perform RAM reset when the ClassPad freezes up or otherwise fails to perform as expected
for some reason. A RAM reset does not affect data stored in main memory or the storage
area, but it clears any data stored in the RAM area.
Memory Reset
Memory reset deletes all variable data in main memory or all eActivity data in the storage
area, or both.
Memory Initialize
Initializing memory deletes all data and returns ClassPad memory to its initial factory default
state.
This section explains how to perform the RAM reset operations only. The memory reset and
memory initialize operations are performed using the System application. For details, see
“14-3 Using the Reset Dialog Box” and “14-4 Initializing Your ClassPad”.
α
-1-1
Resetting and Initializing the ClassPad
To Next Page
Loading...
Need help?
General
