59
Advanced function Description
DUAL FEEDER MODE
WATER COOLER OPTIONAL
ROBOT BURN BACK DISABLED
ROBOT DYNAMICS DISABLED
ROBOT PULSE FREQ. DISABLED
GAS FLUX CONTROL DISABLED
WATER FLUX CONTROL DISABLED
WIRE PRESENCE CONTROL DISABLED
CURRENT MISSING MASK 300 ms
DUAL FEEDER MODE STAND ALONE
SEPARATE - If a double feeder is chosen in the EQUIPMENT LAYOUT menu, in this
mode the second feeder operates separately from the first.
SLAVED - If a double feeder is chosen in the EQUIPMENT LAYOUT menu, in this mode
the second feeder operates simultaneously with and parallel to the first.
SLAVE FEEDER SPEED
WATER COOLER OPTIONAL
ROBOT DYNAMICS DISABLED
ROBOT PULSE FREQ. DISABLED
GAS FLUX CONTROL DISABLED
WATER FLUX CONTROL DISABLED
WIRE PRESENCE CONTROL DISABLED
CURRENT MISSING MASK 300 ms
DUAL FEEDER MODE STAND ALONE
SLAVE FEEDER SPEED +0‰
The parameter indicates the speed difference in ‰ for the slave feeder, compared to the
main feeder.
MIN. ROBOT ANALOG VOLTAGE
WATER COOLER OPTIONAL
ROBOT PULSE FREQ. DISABLED
GAS FLUX CONTROL DISABLED
WATER FLUX CONTROL DISABLED
WIRE PRESENCE CONTROL DISABLED
CURRENT MISSING MASK 300 ms
DUAL FEEDER MODE STAND ALONE
SLAVE FEEDER SPEED +0‰
MIN. ROBOT ANALOG VOLTAGE 0.0 V
MAX. ROBOT ANALOG VOLTAGE
WATER COOLER OPTIONAL
GAS FLUX CONTROL DISABLED
WATER FLUX CONTROL DISABLED
WIRE PRESENCE CONTROL DISABLED
CURRENT MISSING MASK 300 ms
DUAL FEEDER MODE STAND ALONE
SLAVE FEEDER SPEED +0‰
MIN. ROBOT ANALOG VOLTAGE 0.0 V
MAX. ROBOT ANALOG VOLTAGE 10.0 V
These parameters are used to set the maximum and minimum voltage settings used to
control the robot board’s analogue inputs.
The settable values are:
MINIMUM ROBOT ANALOGUE V from 0V to 2V
MAXIMUM ROBOT ANALOGUE V from 5V to 14,5V
To exit the EQUIPMENT LAYOUT Menu and go back to the ADVANCED SETUP Menu:
• Push the MENU K
EY.
To Next Page
Loading...
