6
Check the Contents of Each Box
Main Unit
• Installation Guide
• Rating label sheet (inside guide)
• Wall mounting template (inside guide)
• Charging station
• Faceplate
• Mounting skirt
• Wire cover
• 1/4 x 2 in lag screws (3)
• 1/4-20 x 3/8 in Phillips screw
• 1/4-20 x 3/4 in hex bolts (2)
• 6-32 x 3/8 T10 Torx screws (2)
• Spare activation label
(A duplicate label is attached to front of the charging station. Keep this spare label. It contains
important information needed to activate the station on the ChargePoint network.)
• Charging cable
About the Charging Cable
Charging cables come in two lengths: 5.5 m (18 ft) or 7 m (23 ft).
Verify the length. If you ordered a CMK, ensure that the charging
cable matches the length of the CMK. The charging cables for use
with CMK have a cable clamp (a) preinstalled on the charging cable.
• 99-004507 includes the 5.5 m (18 ft) charging cable for use
without CMK
• 99-004501 includes the 7 m (23 ft) charging cable for use
without CMK
• 99-004508 includes the 5.5 m (18 ft) charging cable with cable
clamp for use with CMK8
• 99-004509 includes the 7 m (23 ft) charging cable with cable
clamp for use with CMK6