Small-Scale Deployment Installation
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|36
9. On the VPN Domain page, configure the VPN Encryption Domain settings and click
Next:
Note - This page appears only if on the previous Blade Activation page you
selected the IPSec VPN Software Blade.
Available options:
n
Hide VPN domain behind this gateway's external IP
Select this option only if you want to hide all internal networks behind this
gateway's external IP. All outgoing traffic from networks behind this gateway to
other sites that participate in VPN community is encrypted.
With this option, connections that are initiated from other sites that are directed to
hosts behind this gateway are not encrypted. If you need access to hosts behind
this gateway, select other options (define VPN topology) or make sure all traffic
from other sites is directed to this gateway's external IP address and define
corresponding NAT port-forwarding rules, such as: translate the destination of
incoming HTTP connections that are directed to this gateway's external IP address
to the IP address of a web server behind this gateway.
n
Create a new VPN domain
a. In the Name field, enter a name for the group.
b. From the Available objects list, select the applicable objects and click Add.
The objects are added to the VPN domain members list.
Note - To select multiple separate objects, press and hold the Ctrl key while
you click them. To select multiple adjacent objects, press and hold the Shift
key while you click the first and the last of them.
n
Select an existing VPN domain
You must create this VPN domain before you start the wizard.
10. On the Installation Wizard Completion page:
You see a summary of the configuration parameters you set.
If you want to configure more options of the Security Gateway, select Edit Gateway
properties for further configuration.
Click Finish.
11. The General Properties window of the newly defined object opens.
Configure the applicable settings and click OK.
12. Install the Security Policy on the gateway object.
To Next Page
Loading...
