Small-Scale Deployment Installation
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|35
7. On the Blade Activation page, select Activate and configure software blades now or
Activate and configure software blades later.
If you selected Activate and configure software blades now:
a. Select the check boxes next to the Software Blades you want to activate.
b. Click Next.
8. On the Blade Configuration page, configure the required options and click Next:
Note - This page appears only if on the previous Blade Activation page you
selected Activate and configure software blades now.
n
NAT - The Hide internal networks behind the Gateway's external IP checkbox is
selected by default.
n
IPSec VPN - In the Participate in a site to site community field, select a VPN
community that this gateway participates in (you must create this VPN community
before you start the wizard). If it is a star community, this gateway becomes a VPN
satellite gateway.
n
QoS - Select the applicable inbound and outbound bandwidth rates.
To Next Page
Loading...
