Small-Scale Deployment Installation
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Centrally Managed Administration Guide|39
Part 1 - Initial configuration of two new Quantum Spark appliance gateways:
1. Do
not
connect the two Quantum Spark appliances to the power source.
2. Connect the required cables to the two Quantum Spark appliances and between them.
3. Connect the first Quantum Spark appliance to the power source and turn it on.
4. Connect your computer to the first Quantum Spark appliance to the LAN1 interface.
5. Configure your computer to get an IP address automatically.
6. In a web browser on your computer, connect to:
http://my.firewall
To Next Page
Loading...
