Chroma 19032 - Page 16

xiv
– description in the section of “Error Messages”.
Dec. 2008
1.7
Add
– Step Signal of “System parameter setting data table” in the
section of “System Parameter Setting”.
Modify
– the description in the section of “Features”.
– the description for “PRINT Key” in the section of “Front
Panel”.
– the descriptions for “GPIB INTERFACE(Option)” and “
Plug in
SCANNER Insert Hole(Option)” in the section of “Rear
Panel”.
– the description for ARC LIMIT item of “Parameter settings”
in
the section of “Single Test Mode”.
– “STEP 3: IR Menu” in the section of “Auto Mode Setting”.
– the descriptions in the section of “Remote Command”.
Mar. 2010
1.8
Add
– UL/TUV required descriptions.
– LC OFFS GET of “System parameter setting data table” in
the section of “System Parameter Setting”.
– AC FREQ. of “Withstanding Voltage Test Mode (AC)” in the
section of “Each Parameters Setting Description”.
Modify
– Ramp Judg. of “Testing preset parameter function
description table” in the section of “Simple Setting Wizard”.
– the description in the section of “Single Test Mode”.
– the description in the section of “Remote Command
Summary”.
– the description in the section of “Remote Command
Description”.
– the description of “-221 Setting conflict” in the section of
“Error Messages”.
Delete
– “CHLO” of “Fail Status Description Table” in the section of
“GB/AC/DC/IR Test Procedure”.
Jun. 2010
1.9
Add two new items in the chapter of “Precaution before Use”.
Dec. 2010
2.0
Modify “Material Contents Declaration”.
May 2011
2.1
Modify standard package table in “Inspection and
Examination”.
Feb. 2012
2.2
Add the section of “Timing Diagram”.
Modify
– “CE Declaration”.
– the description in the section of “Start Wait Function”.
Aug. 2015
2.3
Add the warning to the section of “Hazardous Operating
Conditions”.
Dec. 2015
2.4
Modify “Specifications” and “System Parameter Settings” in the
chapter of “Description of Panel”.
Aug. 2016
2.5
Replace CE “Declaration of Conformity”.
Jan. 2017
2.6
Remove FAIL related description.
Apr. 2017
2.7
Update CE “Declaration of Conformity”.