Chroma 19053 - Page 60

HIPOT Tester 19051/19052/19053/19054 User’s Manual
: FAIL
: OPERation STOP|CONTinue|RESTart
: OPERation?
: SCREen <Boolean>|ON|OFF
: SCREen?
: KEYboard
: SMARt <Boolean>|ON|OFF
: SMARt?
: RJUDgment <Boolean>|ON|OFF
: RJUDgment?
: NUMber
: PART
: PART?
: LOT
: LOT?
: SERIal
: SERIal?
: SYSTem
: VERSion?
: SYSTem: VERSion?
This command queries the SCPI version of this device.
Example: Input command “SYST:VERS?”
Return message “1990.0”
Description: Return message “1990.0” means the device supported SCPI version is
1990.0.
: ERRor
: [NEXT]?
: SYSTem: ERRor: [NEXT]?
This command read message in Error Queue.
Returned message please refer to section 5.7 Error Message.
Example: Input command “SYST:ERR?”
Return message “+0,”No error”
Description: Return message “+0, “No error” means there is no error message in
queue.
: KLOCk < boolean >
|ON |OFF
: SYSTem: KLOCk
This command locks or releases LOCAL key function but no switch of LOCAL or
REMOTE.
Example: Input command “SYST:KLOC ON”
Description: It means LOCAL function key locked for setting panel.
: KLOCk?
:SYSTem: KLOCk?
This command queries if LOCAL key is being locked.
Example: Input command “SYST:KLOC?”
Return message “1”
Description: Return message “1” means LOCAL key is locked.
: LOCk
: OWNer?
: SYSTem:LOCk:OWNer?
5-10
www.valuetronics.com