GPIB Operation Description (Option)
This command queries if it is controlled by REMOTE terminal.
Return character data NONE|REMOTE.
Example: Input command “SYST:OWN?”
Return message “REMOTE”
Description: Return message “REMOTE” means the instrument is under the
status of REMOTE terminal control.
: REQuest?
: SYSTem:LOCk:REQuest?
This command switches to REMOTE terminal control.
Example: Input command “SYST:REQ?”
Return message “1”
Description: Return message “1” means the instrument is already set to the status
of REMOTE.
: RELease
: SYSTem:LOCk:RELease
This command switches to LOCAL terminal control.
Example: Input command “SYST:REL”
Description: It means the instrument is already set to the status of NONE.
: MEMory
: DELete
LOCAtion < register number >
: MEMory: DELete: LOCAtion
This command deletes the parameter data in the main memory.
Example: Input command “MEM:DEL:LOCA 1”
Description: It means to delete the first group of parameter data in the main
memory.
: STATe
: DEFine < name >, < register number >
The command sets the name of the location of a certain memory in the main
memory.
< name > The characters can be used are 0 ~ 9, A ~ Z, —.
Example: Input command “MEM:STAT:DEF TEST,1”
Description: It means to set the first group of parameter data name in the main
memory is TEST.
: DEFine? < name >
The command queries the location in the main memory by the name of memory.
< name > The characters can be used are 0 ~ 9, A ~ Z, —.
Example : Input command “MEM:STAT:DEF? TEST”
Return message “1”
Description: Return message “1” means the parameter data location of TEST is at
the first group.
: LABEl? < register number >
This command queries the name in the main memory is by the location of the
memory.
Example: Input command “MEM:STAT:LABEl? 1”
Return message “TEST”
Description: Return message “TEST” means the first group parameter data name
is TEST.
5-11
www.valuetronics.com
To Next Page
Loading...
