Chroma 19053 - Page 87

GPIB Operation Description (Option)
This command queries if SMART KEY is ON or OFF.
Return character 0 or 1 (0 indicates SMART KEY don’t open, 1
indicates SMART KEY opened).
Example: Input command “SAFE: PRES: KEY: SMRT?”
Return message “1”
Description: Return message “1” means the setting status of
SMART KEY is ON.
: NUMber
: PART
: SOURce: SAFEty: PRESet: NUMber: PART
This command sets part number of the product.
Example: Input command “SAFE: PRES: NUM: PART 19054”
Description: This command means part number of the product is set
to 19054.
: PART?
SOURce: SAFEty: PRESet: NUMber: PART?
This command queries part number of the product.
Example: Input command “SAFE: PRES: NUM: PART?”
Return message “19054”
Description: Return message “19054” means part number of the
product is 19054.
LOT
: SOURce: SAFEty: PRESet: NUMber: LOT
This command sets lot number of the product.
Example: Input command “SAFE: PRES: NUM: LOT 0054”
Description: This command means lot number of the product is set
to 0054.
LOT?
: SOURce: SAFEty: PRESet: NUMber: LOT?
This command queries lot number of the product.
Example : Input command “SAFE: PRES: NUM: LOT?”
Return message “0054”
Description: Return message “0054” means lot number of the
product is 0054.
SERIal
: SOURce: SAFEty: PRESet: NUMber: SERIal
This command sets serial number format of the product, denoted
changeable character by *.
Example: Input command “SAFE: PRES: NUM: SERI AAP190540***”
Description: This command means serial number format of the
product is set to “AAP190540***”.
SERIal?
: SOURce: SAFEty: PRESet: NUMber: SERIal?
This command queries serial number format of the product.
Example: Input command “SAFE: PRES: NUM: SERI?”
Return message “AAP190540***”
Description: Return message “AAP190540***” means serial
number of the product is AAP190540***.
5-37
www.valuetronics.com