Panel Description
The display shows as following by pressing [NEXT PAGE] on previous screen
The above parameters are described as following:
PRI: 1 : The first level pin setting.
TRANSFORMER : Pin position of the transformer
FIXTURE. : The pin of transformer on the fixture
PHASING : The indicator of the pin phasing on the transformer
PRIMARY : The primary level pin position of the transformer
SEC: 1…9 : The pin positions of each secondary level
The following screen is setting for the pin on transformer reflect to the fixture. It is still a
guidable operation what just following the method of the display to key in the testing
parameter and finish it by pressing [Enter] to jump to next testing item. As above, by
pressing [Enter] of the last item on each screen, the unit will jump to next setting screen
automatic. If the user desire to change the setting on each back-light, the value may change
by pressing the key which under the Cursor.
To Next Page
Loading...
