High Power Electronic Load 63200A Series Operation & Programming Manual
STATus:CHANnel:ENABle
Type: Channel-Specific
Description: Mask to select which bit in the Event register is allowed to be
summed into the corresponding channel bit for the Channel
Summary Event register.
Setting Syntax: STATus:CHANnel:ENABle<space><NR1>
Setting Parameters:<NR1>, 0 ~ 2
32
-1, Unit = None
Setting Example: STAT:CHAN:ENABl 24
Query Syntax: STATus:CHANnel:ENABle?
Return Parameters:<NR1>
Query Example: STAT:CHAN:ENAB? Return the contents of the Status
Channel Enable register.
Return Example: 24
STATus:CHANnel:EVENt?
Type: Channel-Specific
Description: Record all channel events that have occurred since last time the
register was read, and reset the Channel Event register.
Query Syntax: STATus:CHANnel:EVENt?
Return Parameters:<NR1>
Query Example: STAT:CHAN:EVEN? Read and reset the Channel Event
register.
Return Example: 24
STATus:CHANnel:PTRansition
Type: Channel-Specific
Description: Programmable filters that determine 0-to-1 transition in the
Condition register will set the corresponding bit of the Event register.
Setting Syntax: STATus:CHANnel:PTRansition<space><NR1>
Setting Parameters:<NR1>, 0 ~ 2
32
-1, Unit = None
Setting Example: STAT:CHAN:PTR 4 Set over current bit 2 from 0-to-1.
Query Syntax: STATus:CHANnel:PTRansition?
Return Parameters:<NR1>
Query Example: STAT:CHAN:PTR?
Return Example: 4
STATus:CHANnel:NTRansition
Type: Channel-Specific
Description: Programmable filters that determine 1-to-0 transition in the
Condition register will set the corresponding bit of the Event register.
Setting Syntax: STATus:CHANnel:NTRansition<space><NR1>
Setting Parameters:<NR1>, 0 ~ 2
32
-1, Unit = None
Setting Example: STAT:CHAN:NTR 4 Set over current bit 2 from 1-to-0.
Query Syntax: STATus:CHANnel:NTRansition?
Return Parameters:<NR1>
Query Example: STAT:CHAN:NTR?
Return Example: 4
STATus:CSUMmary:ENABle
Type: Channel-Specific
Description: Mask to select which bit in the Channel Event register is allowed to
be summed into the CSUM (Channel Summary) bit for the Status
Byte register.