Chroma 63200A Series User Manual

High Power Electronic Load 63200A Series Operation & Programming Manual
1-4
Range
as mode range
Level
0 - 10V
Accuracy
0.4%F.S.
CC mode BW
20kHz
Input impedance
10kΩ
Resolution
4mV
Monitor
Voltage Range
0~L_range F.S
0~M_range F.S
0~H_range F.S
Current Range
0~L_range F.S
0~M_range F.S
0~H_range F.S
Output
0-10V
Bandwidth
20kHz
Accuracy
0.5%F.S.
Output impedance
10kΩ
Resolution
4mV
Protection
Over Current
Yes (Settable)
Over Power
Yes (Settable)
Over Temperature
Yes
Over Voltage Alarm
Yes
Reverse Alarm
Yes
Short
*8
Mode
CC, CR, CV, CP
Other
Operating Temp
0-40°C
Storage Temp
-20-80°C
Temperature
Coefficient
100ppm/°C (Typical)
EMC & Safety
CE
Input Power & Dimensions
Model
63205A-150-500
63206A-150-600
AC Input Range
100-240VAC / 47-63Hz
Maximum VA
200VA(max)
200VA(max)
Fuse
2.5A
2.5A
Weight
35kg / 77.2lbs
35kg / 77.2lbs
HxWxD*
177 x 428 x 647 mm / 6.97 x 16.85 x 25.47 inch
Noise
*7
78.5 dB(max)
78.5 dB(max)
*This value is the maximum noise measured 1 meter in front of the load frame when the Electronic
Load is full power at 40°C.
*The height indicated here does not include the stand 17.8mm/0.7 inch and the depth does not include
the protective cover 63.41mm/2.5 inch.
CAUTION
This equipment is not intended for performing measurements on CAT II,
III or IV.
1. The specifications are guaranteed to meet specified performance at
temperature range of 25±5°C.
2. The power rating specifications at ambient temperature = 25°C and
see the diagram below for power derating.

Chroma 63200A Series Specifications

General

Brand	Chroma
Model	63200A Series
Category	Test Equipment
Language	English