3. If the operating voltage exceeds the rated voltage for 1.1 times, it
would cause permanent damage to the device.
4. Please refer to user's manual for detail specifications, and S
(siemens) is the SI unit of conductance, equal to one reciprocal
ohm
5. Power F.S. = Vrange F.S. × Irang F.S.
6. The specification is valid only for loading current >20A.
7. The measured maximum noise is tested under the condition of
40°C ambient temperature with full power for 5 minutes and 1
meter away from the frame.
8. The short circuit function is to simulate full power loading and is
unable to do mechanical short circuit.
To Next Page
Loading...
Need help?
General
