Chroma 63200A Series User Manual

Remote Operation
4-13
CONF:SHOR:KEY 1 Set SHORT key function to
enable.
Query Syntax: CONFigure:SHORt:KEY?
Return Parameters: <CRD>, HOLD(0), TOGGLE(1), DISABLE(2) [Unit = None]
Query Example: CONF:SHOR:KEY?
CONFigure:SOUNd
Type: Channel-Specific
Description: Set the buzzer on/off in Load.
Setting Syntax: CONFigure:SOUNd<space><CRD | NR1>
Setting Parameters:<CRD | NR1>, OFF(0), ON(1)
Setting Example: CONF:SOUN OFF Set buzzer to OFF.
CONF:SOUN 1 Set buzzer to ON.
Query Syntax: CONFigure:SOUNd?
Return Parameters:<CRD>, OFF(0), ON(1) [Unit = None]
Query Example: CONF:SOUN?
CONFigure:DIO:IN1
Type: Frame-Specific
Description: Set the DI1 type the pin No.11 in System I/O Port.
Setting Syntax: CONFigure:DIO:IN1<space><NR1>
Setting Parameters: <NR1>, 0 ~ 2
0：NONE
1：EXTERNAL LOAD ON/OFF
2：REMOTE INHIBIT
Setting Example: CONF:DIO:IN1 2 Set DI1 to REMOTE INHIBIT.
CONF:DIO:IN1 0 Set DI1 to NONE.
Query Syntax: CONFigure:DIO:IN1?
Return Parameters: <NR1>, 0 ~ 2 [Unit = None]
Query Example: CONF:DIO:IN1?
CONFigure:DIO:IN2
Type: Frame-Specific
Description: Set the DI2 type the pin No.12 in System I/O Port.
Setting Syntax: CONFigure:DIO:IN2<space><NR1>
Setting Parameters: <NR1>, 0 ~ 2
0：NONE
1：EXTERNAL LOAD ON/OFF
2：REMOTE INHIBIT
Setting Example: CONF:DIO:IN2 2 Set DI2 to REMOTE INHIBIT.
CONF:DIO:IN2 0 Set DI2 to NONE.
Query Syntax: CONFigure:DIO:IN2?
Return Parameters: <NR1>, 0 ~ 2 [Unit = None]
Query Example: CONF:DIO:IN2?
CONFigure:DIO:OUT1
Type: Frame-Specific
Description: Set the DO1 type the pin No.8 in System I/O Port.
Setting Syntax: CONFigure:DIO:OUT1<space><NR1>
Setting Parameters: <NR1>, 0 ~ 7
0：NONE
1：OCP TEST PASS-H

Chroma 63200A Series Specifications

General

Brand	Chroma
Model	63200A Series
Category	Test Equipment
Language	English