Chroma 63200A Series User Manual

High Power Electronic Load 63200A Series Operation & Programming Manual
4-16
CURR:STAT:RISE MIN Set rising slew rate to the
minimum value of static load.
Query Syntax: CURRent:STATic:RISE?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = A/μs]
Query Example: CURR:STAT:RISE?
CURR:STAT:RISE? MAX
CURR:STAT:RISE? MIN
CURRent:STATic:FALL
Type: Channel-Specific
Description: Set the falling slew rate of current for constant current static mode.
Setting Syntax: CURRent:STATic:FALL<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:STAT:FALL 2.5 Set falling slew rate to 2.5A/μs.
CURR:STAT:FALL 1A/μs Set falling slew rate to 1A/μs.
CURR:STAT:FALL MAX Set falling slew rate to the
maximum value of static load.
CURR:STAT:FALL MIN Set falling slew rate to the
minimum value of static load.
Query Syntax: CURRent:STATic:FALL?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = A/μs]
Query Example: CURR:STAT:FALL?
CURR:STAT:FALL? MAX
CURR:STAT:FALL? MIN
CURRent:STATic:VRNG
Type: Channel-Specific
Description: Set the voltage measurement range in CC mode.
Setting Syntax: CURRent STATic:VRNG<space><CRD | NR1>
Setting Parameters:<CRD | NR1>, LOW | L | 0, MIDDLE | M | 1, HIGH | H | 2
Setting Example: CURR:STAT:VRNG HIGH Set voltage range to High.
CURR:STAT:VRNG M Set voltage range to Middle.
CURR:STAT:VRNG 0 Set voltage range to Low.
Query Syntax: CURRent: STATic: VRNG?
Return Parameters:<CRD>, LOW(0), MIDDLE(1), HIGH(2) [Unit = None]
Query Example: CURR:STAT:VRNG?
CURRent:DYNamic:L1
Type: Channel-Specific
Description: Set the load current during T1 period for constant current dynamic
mode.
Setting Syntax: CURRent:DYNamic:L1<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:DYN:L1 20 Set the dynamic load parameter
L1 = 20A.
CURR:DYN:L1 10A Set the dynamic load parameter
L1 = 10A.
CURR:DYN:L1 MAX Set the dynamic load parameter
L1 = maximum value.
CURR:DYN:L1 MIN Set the dynamic load parameter
L1 = minimum value.
Query Syntax: CURRent:DYNamic:L1?[<space><MAX | MIN>]
Return Parameters:<NR2>,[Unit = Ampere]

Chroma 63200A Series Specifications

General

Brand	Chroma
Model	63200A Series
Category	Test Equipment
Language	English