Chroma 63200A Series User Manual

High Power Electronic Load 63200A Series Operation & Programming Manual
4-18
Return Parameters:<NR2>, [Unit = Second]
Query Example: CURR:DYN:T2?
CURR:DYN:T2? MAX
CURR:DYN:T2? MIN
CURRent:DYNamic:REPeat
Type: Channel-Specific
Description: Set the repeat count for constant current dynamic mode.
Setting Syntax: CURRent:DYNamic:REPeat<space><NRf+>
Setting Parameters:<NRf+>, 0 ~ 65535, Resolution = 1, Unit = None
Setting Example: CURR:DYN:REP 500 Set repeat count = 500
CURR:DYN:REP MAX Set repeat count = maximum value.
CURR:DYN:REP MIN Set repeat count = minimum value.
Query Syntax: CURRent:DYNamic:REPeat?[<space><MAX | MIN>]
Return Parameters:<NR1>, [Unit = None]
Query Example: CURR:DYN:REP?
CURR:DYN:REP? MAX
CURR:DYN:REP? MIN
CURRent:DYNamic:RISE
Type: Channel-Specific
Description: Set the rising slew rate of current for constant current dynamic
mode.
Setting Syntax: CURRent:DYNamic:RISE<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:DYN:RISE 2.5 Set rising slew rate to 2.5A/μs.
CURR:DYN:RISE 1A/μs Set rising slew rate to 1A/μs.
CURR:DYN:RISE MAX Set rising slew rate to the maximum
value of dynamic load.
CURR:DYN:RISE MIN Set rising slew rate to the minimum
value of dynamic load.
Query Syntax: CURRent:DYNamic:RISE?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = A/μs]
Query Example: CURR:DYN:RISE?
CURR:DYN:RISE? MAX
CURR:DYN:RISE? MIN
CURRent:DYNamic:FALL
Type: Channel-Specific
Description: Set the falling slew rate of current for constant current dynamic
mode.
Setting Syntax: CURRent:DYNamic:FALL<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:DYN:FALL 2.5 Set falling slew rate to 2.5A/μs.
CURR:DYN:FALL 1A/μs Set falling slew rate to 1A/μs.
CURR:DYN:FALL MAX Set falling slew rate to the maximum
value of dynamic load.
CURR:DYN:FALL MIN Set falling slew rate to the minimum
value of dynamic load.
Query Syntax: CURRent:DYNamic:FALL?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = A/μs]
Query Example: CURR:DYN:FALL?
CURR:DYN:FALL? MAX

Chroma 63200A Series Specifications

General

Brand	Chroma
Model	63200A Series
Category	Test Equipment
Language	English