Chroma 63200A Series - Page 91

High Power Electronic Load 63200A Series Operation & Programming Manual
4-28
Setting Example: BATT:ENDV 0.5 Set end voltage = 0.5V
BATT:ENDV 500mV Set end voltage = 0.5V
BATT:ENDV MAX Set end voltage = maximum value.
BATT:ENDV MIN Set end voltage = minimum value.
Query Syntax: [ADVance:]BATTery:ENDVoltage?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Volt]
Query Example: BATT:ENDV?
BATT:ENDV? MAX
BATT:ENDV? MIN
[ADVance:]BATTery:TOUT
Type: Channel-Specific
Description: Set timeout for battery discharge mode.
Setting Syntax: [ADVance:]BATTery:TOUT<space><NRf+>[suffix]
Setting Parameters:<NRf+>, 0s~100000s, Resolution = 1s, Unit = Second
Setting Example: BATT:TOUT 100 Set timeout = 100s
BATT:TOUT MAX Set timeout = maximum value.
BATT:TOUT MIN Set timeout = minimum value.
Query Syntax: [ADVance:]BATTery:TOUT?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Second]
Query Example: BATT:TOUT?
BATT:TOUT? MAX
BATT:TOUT? MIN
[ADVance:]SINE:IAC
Type: Channel-Specific
Description: Set AC current for sine wave dynamic mode.
Setting Syntax: [ADVance:]SINE:IAC<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SINE:IAC 0.5 Set AC current = 0.5A.
SINE:IAC 500mA Set AC current = 0.5A.
SINE:IAC MAX Set AC current = maximum value.
SINE:IAC MIN Set AC current = minimum value.
Query Syntax: [ADVance]:SINE:IAC?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Ampere]
Query Example: SINE:IAC?
SINE:IAC? MAX
SINE:IAC? MIN
[ADVance:]SINE:IDC
Type: Channel-Specific
Description: Set DC current for sine wave dynamic mode.
Setting Syntax: [ADVance:]SINE:IDC<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: SINE:IDC 0.5 Set DC current = 0.5A.
SINE:IDC 500mA Set DC current = 0.5A.
SINE:IDC MAX Set DC current = maximum value.
SINE:IDC MIN Set DC current = minimum value.
Query Syntax: [ADVance:]SINE:IDC?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Ampere]
Query Example: SINE:IDC?
SINE:IDC? MAX
SINE:IDC? MIN