Modes Of Operation
Manual activation of the Surround View system is
selected by pressing the Surround View Camera button
located in the Controls screen within the Uconnect
system.
Top View
The Top View will show in the Uconnect system with
Rear View and Front View in a split screen display.
There is integrated ParkSense arcs in the image at the
front and rear of the vehicle. The arcs will change color
from yellow to red corresponding the distance zones to
the oncoming object.
NOTE:
•
Front tires will be in image when the tires are
turned.
•
Due to wide angle cameras in the mirrors, the image
will appear distorted.
•
Top View will show which sliding doors are open.
•
Open front doors will remove outside image.
Rear View Plus Top View
This is the default view of the system in
REVERSE and is always paired with the Top
View of the vehicle with optional active
guidelines for the projected path when
enabled.
Rear Cross Path View
Pressing the Rear Cross Path button will give
the driver a wider angle view of the Rear
View. The Top View will be disabled when this
is selected.
Front View Plus Top View
Pressing the Front View button will show you
what is immediately in front of the vehicle
and is always paired with the Top View of the
vehicle.
Front Cross Path View
Pressing the Front Cross Path button will give
the driver a wider angle view of the Front
View. The Top View will be disabled when this
is selected.
Back Up Camera View
Pressing the Back Up Camera button will
provide a full screen rear view with Zoom
View.
Zoom View
When the Rear View is being displayed, and the vehicle
speed is below 8 mph (13 km/h) while in any gear
selector position, Zoom View is available. By pressing
the “magnifying glass” icon in the upper left of the dis-
play screen, the image will zoom in to four times the
standard view. Pressing the icon a second time will
return the view to the standard Rear View.
When Zoom View is selected while the vehicle is in
REVERSE, then shifted to DRIVE, the camera delay will
display the standard Rear View. If the vehicle is then
returned to REVERSE gear from DRIVE, the Zoom View
selection will automatically resume.
Shifting to NEUTRAL from any gear will maintain the
selected view (Zoom or Standard) as long as the vehicle
speed is below 8 mph (13 km/h).
If the vehicle is in PARK, Zoom View is available until
the gear selector is placed in DRIVE or REVERSE and
speeds are at or above 8 mph (13 km/h).
NOTE:
•
If the vehicle is in DRIVE, NEUTRAL, or REVERSE,
and speed is greater than or equal to 8 mph
(13 km/h), Zoom View is unavailable and the icon
will appear gray.
•
While in Zoom View, the guidelines will not be
visible.
Deactivation
The system can be deactivated under the following
conditions:
•
The speed of the vehicle is greater than 8 mph
(13 km/h).
•
The vehicle shifted into PARK.
•
The vehicle is in any gear other than REVERSE and
the touchscreen X button is pressed.
•
The camera delay system is turned off manually
through the Uconnect Settings
page 169.
Surround View Camera View
156 STARTING AND OPERATING
To Next Page
Loading...
