The power mirror controls consist of mirror select but-
tons and a four-way mirror control switch. To adjust a
mirror, push either the L (left) or R (right) to select the
mirror that you want to adjust.
NOTE:
A light in the selected button will illuminate indicating
the mirror is activated and can be adjusted.
Using the mirror control switch, push on any of the four
arrows for the direction that you want the mirror to
move.
Left and Right side power mirror positions can be saved
as part of the driver memory profile (if equipped)
page 37.
POWER FOLDING OUTSIDE
MIRRORS — IF EQUIPPED
The switch for the power folding mirrors is located
between the power mirror switches L (left) and R (right).
Push the switch once and the mirrors will fold in, push-
ing the switch a second time will return the mirrors to
the normal driving position.
NOTE:
If the vehicle speed is greater than 10 mph (16 km/h),
the folding feature will be disabled.
If the mirrors are in the folded position, and vehicle
speed is equal to or greater than 10 mph (16 km/h),
they will automatically unfold.
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors if the
following occurs:
•
The mirrors are accidentally blocked while folding
•
The mirrors are accidentally manually folded/
unfolded (by hand or by pushing the power folding
mirror switch)
•
The mirrors come out of the unfolded position
•
The mirrors shake and vibrate at normal driving
speeds
To reset the power folding mirrors: fold and unfold them
by pushing the button (this may require multiple button
pushes). This resets them to their normal position.
AUTOMATIC POWER FOLDING
MIRRORS — IF EQUIPPED
When enabled within Uconnect Settings page 169,
the exterior mirrors will automatically fold when the
vehicle’s ignition is placed in the OFF position, and after
the doors are locked and closed.
The exterior mirrors will auto-fold in the following situa-
tions after the ignition is placed in the OFF position:
•
Pushing the lock button on the door panel before
the door is opened.
NOTE:
If the doors are already locked, push the lock button
again.
•
Opening the door, then pushing the lock button on
the door panel, followed by closing the door.
•
After exiting the vehicle, close the doors then push
the lock button on the key fob.
•
After exiting the vehicle, close the doors then touch
the lock icon on the Passive Entry door handle.
If the exterior mirrors were folded automatically, they
will unfold when the ignition is placed in the ON/RUN
position.
NOTE:
If the mirrors were folded manually (pushing the mirror
head inward by hand), OR by using the power folding
mirror switch on the driver’s door panel, they will not
automatically unfold.
OUTSIDE MIRRORS FOLDING
FEATURE
All outside mirrors are hinged and may be moved either
forward or rearward to resist damage. The hinges have
two detent positions:
•
Full forward position
•
Full rearward position
HEATED MIRRORS — IF EQUIPPED
These mirrors are heated to melt frost or ice.
This feature will be activated whenever you
turn on the rear window defroster
(if equipped)
page 67.
Power Folding Mirror Switch
58 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
