Chrysler PACIFICA 2024 - Engine Fluids and Lubricants; Engine Fluids and Lubricants

To Next Page

To Previous Page

ENGINE FLUIDS AND LUBRICANTS

Component Fluid, Lubricant, or Genuine Part

Engine Coolant

We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive

Technology) or equivalent meeting the requirements of the manufacturer Material Standard MS.90032.

Engine Oil – 3.6L Engine

We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil which meets the requirements of the manufacturer

Material Standard MS-6395. Equivalent full synthetic SAE 0W-20 engine oil can be used but must have the API Starburst

trademark

page 269.

Fuel Selection – 3.6L Engine 87 Octane (R+M)/2 Method, 0-15% ethanol (Do not use E-85).

CAUTION!

•

Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease cor-

rosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (anti-

freeze) or any “globally compatible” coolant (antifreeze). If a non-OAT engine coolant (antifreeze) is introduced into the cooling system in an emergency, the cooling system

will need to be drained, flushed, and refilled with fresh OAT coolant (conforming to MS.90032), by an authorized dealer as soon as possible.

•

Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with

the radiator engine coolant and may plug the radiator.

•

This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not

recommended.

ENGINE FLUIDS AND LUBRICANTS — HYBRID

Component Fluid, Lubricant, or Genuine Part

Engine Coolant, Battery Coolant, Power Electric

Coolant