Chrysler PACIFICA 2024 - Safety and Driving Assistance Settings

Safety & Driving Assistance
After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available:
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name Description
Forward Collision Warning Sensitivity — Located In
Automatic Emergency Braking Submenu
This setting will change the distance at which the Forward Collision Warning (FCW) alert sounds. The “Medium” setting will
have the FCW system signal when an object is in view, and the possibility of a collision is detected. The “Near” setting will
have the FCW system signal when the object is closer to the vehicle. The “Far” setting will have the FCW system signal
when an object is at a far distance from the vehicle.
Forward Collision Warning — Located In Automatic
Emergency Braking Submenu
This setting will turn the Forward Collision Warning system on or off. The “Off” setting will deactivate the FCW system. The
“Warning Only” setting will provide only an audible chime when a collision is detected. The “Warning + Active Braking” set-
ting will provide an audible chime and apply some brake pressure when a collision is detected.
Pedestrian Emergency Braking — Located In Auto-
matic Emergency Braking Submenu
This setting will turn the Pedestrian Emergency Braking system “Off” or “Warning + Active Braking”.
LaneSense Warning — Located In LaneSense
Submenu
This setting will change the distance at which the steering wheel will provide lane departure feedback. The available set-
tings are “Early”, “Medium”, and “Late”.
LaneSense Strength — Located In LaneSense
Submenu
This setting will change the strength of the steering wheel feedback during a lane departure. The available settings are
“Low”, “Medium”, and “High”.
ParkSense This setting will change the type of ParkSense alert when a close object is detected. The “Sound Only” setting will provide
an audible chime when an object is detected. The “Sound and Display” setting will provide both an audible chime and a
visual display when an object is detected.
Front ParkSense Volume This setting adjusts the volume of the Front ParkSense system. The available settings are “Low”, “Medium”, and “High”.
Rear ParkSense Volume This setting adjusts the volume of the Rear ParkSense system. The available settings are “Low”, “Medium”, and “High”.
Rear ParkSense Braking Assist This setting will turn the Rear ParkSense Braking Assist on or off.
Sliding Door Alert This setting will turn the Sliding Door Alert on and off.
Blind Spot Alert This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Off” setting will
turn off Blind Spot Alert. The “Lights” setting will activate the Blind Spot Alert lights on the outside mirrors. The “Lights +
Chime” setting will activate both the lights on the outside mirrors and an audible chime.
MULTIMEDIA 173
5