Frequently Asked Questions
What is the weight limit (child’s weight + weight of the child restraint)
for using the Tether Anchor with the seat belt to attach a forward-
facing child restraint?
Weight limit of the Child Restraint
Always use the tether anchor when using the seat belt to install a
forward-facing child restraint, up to the recommended weight limit of
the child restraint.
Can the rear-facing child restraint touch the back of the front pas-
senger seat?
Yes
Contact between the front passenger seat and the child restraint is
allowed, if the child restraint manufacturer also allows contact.
Can the rear head restraints be removed? Yes
The 2nd row head restraints on bench and the center head restraint
in the 8 passenger vehicle can be removed if they interfere with the
installation of the child restraint. 2nd row Quad and Stow 'n Go head
restraints are not removable. The 3rd row center head restraint is
removable in all vehicles, but the 3rd row outboard head restraints
are not removable
page 53.
Can the buckle stalk be twisted to tighten the seat belt against the
belt path of the child restraint?
No
Do not twist the buckle stalk in a seating position with an ALR
retractor.
Seven Passenger Quad Seat Automatic Locking Retractor
(ALR) Locations (Includes Stow ‘n Go)
ALR — Switchable Automatic Locking Retractor
Top Tether Anchorage Symbol
Eight Passenger Automatic Locking Retractor (ALR)
Locations
ALR — Switchable Automatic Locking Retractor
Top Tether Anchorage Symbol
234 SAFETY
To Next Page
Loading...
