CipherLab 8001 User Manual

72
FORGE Batch Application Generator User Guide
Industrial 25 (= Discrete 25) Enable
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
Any Length
Interleaved 25 Enable
Convert to EAN-13 Convert a 14-character barcode into EAN-13 if the
following requirements are met:
 The barcode must have a leading 0 and a valid EAN-13
check digit.
No
Verify Check Digit Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
 No
 USS algorithm
 OPCC algorithm
No
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
 "Verify Check Digit" must be enabled so that the check
digit can be left out (= "Transmit Check Digit"
disabled).
No
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
Any Length
Code 39 Enable
Convert to Code 32 Convert to Italian Pharmacode. No
Code 32 Prefix Prefix character "A" to Code 32 barcodes. No
Verify Check Digit Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
No
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
 "Verify Check Digit" must be enabled so that the check
digit can be left out (= "Transmit Check Digit"
disabled).
No
Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and
special characters.
Disable
Trioptic Code 39 Decide whether to decode Trioptic Code 39.
 Trioptic Code 39 is a variant of Code 39 used in the
marking of computer tape cartridges. It always
contains six characters.
Disable
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
Any Length
Code 93 Disable

CipherLab 8001 Specifications

General

Brand	CipherLab
Model	8001
Category	Docking Station
Language	English