CipherLab 8001 User Manual

73
Appendix III LR/ELR Laser Scan En
g
ine
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
Any Length
MSI Disable
Verify Check Digit If Two Check Digits option is selected, an additional
verification is required to ensure integrity. Select one of
the algorithms below. If the check digit
is incorrect, the
barcode will not be accepted.
Check Digit Algorithm
One Check Digit Single Modulo 10
Two Check Digits
 Mod 10/Mod 11
 Mod 10/Mod 10
Single Modulo
10
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
No
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
Any Length
GS1 Databar ---
GS1 Databar -14 Enable
GS1 Databar Limited Enable
GS1 Databar Expanded Enable
Covnert RSS to
UPC/EAN
"Convert to UPC/EAN" only applies to GS1 Databar -14 and
GS1 Databar Limited barcodes not decoded as part of a
Composite barcode.
Convert to EAN-13
Strip the leading "010" from barcodes.
 "01" is the Application ID and must be followed by a
single zero (the first digit encoded)
Convert to UPC-A
Strip the leading "0100" from barcodes.
 "01" is the Application ID and must be followed by
two or more zeros (but not six zeros)
No
EAN-8 Enable
Convert to EAN-13 The EAN-8 barcode will be expanded into EAN-13, and the
next processing will follow the settings configured for
EAN-13.
No
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
EAN-13 Enable
Bookland EAN (=
ISBN)
The EAN-13 barcode starting with 978 will be converted to
ISBN.
No
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
UPC-A Enable

CipherLab 8001 Specifications

General

Brand	CipherLab
Model	8001
Category	Docking Station
Language	English