Contents
v
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
OL-32185-02
Set Chassis on Desktop 3-4
Attach Chassis to Wall or Mount Chassis in Rack 3-5
Install Cisco 4400 or 4300 ISR 3-5
Install Cisco 4200 Series ISR 3-12
Chassis Grounding 3-19
Connect Power 3-20
Connect to AC Power 3-21
Connect to Console Terminal or Modem 3-22
Connect to Serial Port with Microsoft Windows 3-22
Connect to Console Port with Mac OS X 3-23
Connect to Console Port with Linux 3-24
Install Cisco Microsoft Windows USB Device Driver 3-24
Install Cisco Microsoft Windows XP USB Driver 3-25
Install Cisco Microsoft Windows 2000 USB Driver 3-25
Install Cisco Microsoft Windows Vista USB Driver 3-25
Uninstall Cisco Microsoft Windows USB Driver 3-26
Uninstall Cisco Microsoft Windows XP and 2000 USB Driver 3-26
Uninstall Cisco Microsoft Windows Vista USB Driver 3-27
Connect WAN, LAN, and Voice Interfaces 3-27
Ports and Cabling 3-28
Connection Procedures and Precautions 3-29
Configure Initial Router Settings on Cisco 4000 Series ISRs 3-29
ROM Monitor Overview and Basic Procedures 3-29
CHAPTER
4 Configure Initial Router Settings on Cisco 4000 Series ISRs 4-1
Perform Initial Configuration on Cisco 4000 Series ISRs 4-1
Use Cisco Setup Command Facility 4-1
Complete the Configuration 4-4
Use Cisco IOS XE CLI—Manual Configuration 4-5
Configure Cisco 4000 Series ISR Hostname 4-6
Configure the Enable and Enable Secret Passwords 4-7
Configure the Console Idle Privileged EXEC Timeout 4-8
Gigabit Ethernet Management Interface Overview 4-10
Default Gigabit Ethernet Configuration 4-10
Gigabit Ethernet Port Numbering 4-10
Configure Gigabit Ethernet Interfaces 4-11
Configuration Examples 4-12
Specify a Default Route or Gateway of Last Resort 4-13
Configure IP Routing and IP Protocols 4-13